Lockscrew
Our holding magnet lockscrews are manufactured from standard parts according to DIN EN ISO 4026-45H. Dimensions and tolerances depend on the current status of the standard. The threaded pins with hexagon socket have a universal thread and are available with different lengths corresponding to fixed standards. Moreover, through the universal thread, they benefit from a continuously adjustable magnetic attachment point.
The stated forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation.
| Article no | Thread MxL | SW [mm] | Strength [N] | Weight [g] | Max temp. [°C] | Request for offer |
|---|---|---|---|---|---|---|
| 61-0706-12 | M6x12 | 3 | 2.5 | 2 | 80 | |
| 61-0706-16 | M6x16 | 3 | 2.5 | 3 | 80 | |
| 61-0706-20 | M6x20 | 3 | 2.5 | 4 | 80 | |
| 61-0706-25 | M6x25 | 3 | 2.5 | 5 | 80 | |
| 61-0706-30 | M6x30 | 3 | 2.5 | 6 | 80 | |
| 61-0708-16 | M8x16 | 4 | 7 | 6 | 80 | |
| 61-0708-20 | M8x20 | 4 | 7 | 8 | 80 | |
| 61-0708-25 | M8x25 | 4 | 7 | 10 | 80 | |
| 61-0708-30 | M8x30 | 4 | 7 | 11 | 80 | |
| 61-0708-40 | M8x40 | 4 | 7 | 15 | 80 | |
| 61-0710-20 | M10x20 | 5 | 11 | 12 | 80 | |
| 61-0710-25 | M10x25 | 5 | 11 | 15 | 80 | |
| 61-0710-30 | M10x30 | 5 | 11 | 18 | 80 | |
| 61-0710-40 | M10x40 | 5 | 11 | 24 | 80 | |
| 61-0710-50 | M10x50 | 5 | 11 | 30 | 80 | |
| 61-0712-25 | M12x25 | 6 | 17 | 21 | 80 | |
| 61-0712-30 | M12x30 | 6 | 17 | 25 | 80 | |
| 61-0712-40 | M12x40 | 6 | 17 | 34 | 80 | |
| 61-0712-50 | M12x50 | 6 | 17 | 43 | 80 | |
| 61-0712-60 | M12x60 | 6 | 17 | 52 | 80 | |
| 61-0716-30 | M16x30 | 8 | 35 | 45 | 80 | |
| 61-0716-40 | M16x40 | 8 | 35 | 60 | 80 | |
| 61-0716-50 | M16x50 | 8 | 35 | 76 | 80 | |
| 61-0716-60 | M16x60 | 8 | 35 | 92 | 80 | |
| 61-0716-80 | M16x80 | 8 | 35 | 123 | 80 |
